Skip to content
Free guide: How to use AI in compliance
A clipboard with an insurance certificate, a hard hat, a paint roller and a magnifying glass checking a ledger of records.

How to check a Florida contractor's workers' comp proof of coverage and exemptions on the state record, who needs cover, and why a certificate is not enough.

Table of contents
  • In Florida, a construction business needs workers' compensation from its first employee, most other businesses from four, and farms from six regular employees.
  • A contractor is liable for the injured employees of an uninsured subcontractor, and the law tells contractors to require evidence of cover.
  • The state publishes a Proof of Coverage search and an Exemption search. Both are free and both are more current than any certificate a vendor sends you.
  • An exemption covers one named officer of one named business, lasts two years, and does not cover that business's employees.
  • A certificate of insurance (ACORD 25) is evidence that a policy existed when it was issued. It does not change when the policy is cancelled.

Florida workers' comp proof of coverage is the state's own record that a business holds a workers' compensation policy in force, kept by the Division of Workers' Compensation and searchable by business name or FEIN. It is the source to check before a contractor works, because a certificate can be outdated, cancelled or issued to another business.

TL;DR

Florida asks a construction business to insure its workers from the first employee and most other businesses from the fourth. When you hire a contractor, the document you usually get is an ACORD 25 certificate, but the record that decides is the state's. Search the Division of Workers' Compensation proof of coverage database for a policy in force, and the exemption database for officers who opted out. Accept an exemption only for the people it names, and remember it never covers their employees. Platforms that onboard hundreds of contractors automate exactly this check.

This article is general information on Florida law as of 20 November 2026, not legal advice.

Who must carry workers' compensation in Florida?

Section 440.02 of the Florida Statutes defines covered employment. Two thresholds apply:

BusinessWorkers' compensation required fromWho counts
Construction industry1 employeeEmployees, plus sole proprietors and partners engaged in construction, plus corporate officers and LLC members who are not exempt
Other private businesses, except farms4 employeesEmployees, plus corporate officers and LLC members who are not exempt
Farms (agricultural labor)6 regular employees, or 12 seasonal workers at one time for 30 days or more, or for more than 45 days in a calendar yearRegular and seasonal farm employees

Two details catch people out. In construction, a sole proprietor or a partner is treated as an employee, so a one-person painting or roofing business still needs cover unless its owners can lawfully opt out. And a member owning at least 10% of an LLC counts as a corporate officer, which matters for the exemption rules below.

If you also hire in other states, the numbers change. Georgia counts from three workers, and Alabama from five in most trades. A US-wide contractor programme needs a rule per state, not one threshold for the whole country. Our certificate of insurance verification page lists the thresholds Zyphe applies today.

Why is a certificate of insurance not enough?

The ACORD 25 is the standard US certificate of liability insurance. A broker issues it to show the policies a business held on that day, with insurers, policy numbers and dates. The form itself says it is issued for information only and does not amend or extend the cover. Three things go wrong with it in practice:

  1. It goes stale. A policy cancelled for non-payment a week after the certificate was issued still looks in force on the PDF.
  2. It names the wrong business. A certificate made out to a related company, a previous trading name or a general contractor proves nothing about the vendor in front of you.
  3. It can be edited. A PDF is easy to alter, and nobody in an onboarding queue compares it with the insurer.

The certificate is still useful: it is the only place general liability shows up, and it tells you which insurer and policy number to look for. But for workers' compensation in Florida, the proof of coverage record is the source of truth, and it should decide when the two disagree. This is the same principle we apply to company records in KYB verification: check the register, not the document the applicant uploaded.

How do you search Florida's proof of coverage record?

The Division of Workers' Compensation runs a free proof of coverage search on its data portal. A manual check takes a few minutes:

  1. Open the Proof of Coverage search on the Division's data portal.
  2. Search by the vendor's legal business name, or by FEIN if you have it. FEIN avoids false matches between similar names.
  3. Read each policy row: the insurer, the policy number, and the effective and expiration dates.
  4. Confirm a policy is in force today. A row that is cancelled, expired or not yet effective is not cover.
  5. If nothing is in force, search the Exemption database for the business's officers.
  6. Keep the result with the date you checked it. The record is a snapshot, and a cancelled policy shows up on the next search, not on the certificate.

The record is not instant either. Florida allows insurers 21 days after a policy or a change takes effect to report it to the Division, so a cancellation from last week may not show yet. For contractors you keep using, the Division's free Construction Policy Tracking service emails you when a tracked employer's policy or exemption changes, and a re-check at renewal catches the rest.

The proof of coverage search answers one question well: does this employer have a policy in force on the state's record? It does not tell you whether the vendor needed one. That depends on the trade and the headcount, which is why the threshold rule comes first.

How do Florida workers' comp exemptions work?

An exemption is a certificate of election issued by the Division under section 440.05. The rules that matter for a hiring platform:

  • It is personal. It names one officer and the business it was issued for. A new certificate is needed for each different corporation.
  • It lasts two years. Since 2013, a certificate of election is valid for two years from its effective date, and the Division can revoke it earlier.
  • Construction is strict. At most three officers of a construction corporation, or of a group of affiliated corporations, may elect to be exempt, and each must own at least 10% of the stock and be listed with the Division of Corporations.
  • It covers the owner, not the staff. The employees still count. In construction, an exempt officer with even one employee needs a policy for that employee; outside construction, the employees count towards the threshold of four.

So an exemption on the record answers the question only when the only workers are owners, every working owner is named, and each holds an exemption in force for this business and this kind of work. Anything short of that is a case for a person, not an automatic pass. The Division's exemption guidance sets out the application requirements.

What does a contractor risk when a subcontractor is uninsured?

More than most onboarding teams assume. Under section 440.10, when a contractor sublets work, the employees of the subcontractor are treated as working in the same business, and the contractor is liable for their compensation unless the subcontractor has secured it. The same section says a contractor shall require a subcontractor to provide evidence of workers' compensation insurance.

The employer that failed to insure faces the Division directly. Section 440.107 lets it issue a stop-work order and assess a penalty equal to twice the premium the employer would have paid over the period it was uninsured. For a platform that routes jobs to contractors, an uninsured vendor is therefore a liability question and a service interruption, not a paperwork gap.

How do the coverage statuses compare?

A useful way to run vendor onboarding is to give each credential one status that a system can act on. These are the statuses Zyphe returns:

StatusWhat the evidence showsCan the vendor work unattended?
Confirmed at the sourceA policy in force on the state's proof of coverage record, as the insurer last reported itYes, re-checked over time
Not requiredBelow the state's threshold, or owners only, each with an exemption in forceYes
Extracted onlyA certificate in date, with no state record confirming itNo, decide by policy
ExpiredLapsed on the record or on the certificateNo
MissingNo certificate, no line for this cover, or made out to another businessNo
Needs reviewSomething only a person can decide, such as an unnamed exempt ownerNo

The design choice behind the table: only the state record or the state's own rule can let a vendor work without a person looking. A certificate on its own never does.

One case to route to a person: a policy held through a professional employer organization (PEO), an employee leasing company. It covers only the workers leased through it, so check that the vendor's own workers are on it before you rely on it.

How do you verify contractors at scale?

A manual search works for ten vendors a month. A marketplace or a facilities platform onboarding hundreds needs the same check run the same way every time:

  1. Collect the profile with the certificate. Legal name, FEIN, state, trade, business form, employees and working owners. Without the trade and headcount, no rule can tell you whether cover is needed.
  2. Apply the state's rule first. Decide whether a policy is required before searching for one, so a three-person cleaning company in Florida is not blocked for a policy the law does not ask for.
  3. Search the record and let it decide. Where the state's record can be searched, a policy in force there beats the certificate, and a lapse there beats a certificate in date.
  4. Match names properly. Compare the named insured with the vendor's legal name, ignoring case and punctuation. A different legal form, such as Acme LLC against Acme Inc., can be a different company: match on FEIN where you have it, and send the rest to review. Treat a different name as missing cover.
  5. Send one status per credential to your platform. Lock or release jobs on that status, and keep the source and the check date as evidence.

This is what Zyphe's certificate of insurance verification does, inside the same onboarding flow as KYB software. The vendor uploads the ACORD 25 during onboarding, and the statuses arrive on the KYB webhook. Florida is confirmed on the state record today. For Alabama, Georgia and Tennessee the state's rule is applied and the certificate is read, and their records are next. If you run contractor onboarding across many trades, our guide to KYB requirements covers the business checks that sit beside insurance.

The bottom line

In Florida, the question is not whether a contractor sent a certificate but whether the state's record shows cover in force today, or shows a valid reason none is needed. Apply the threshold rule, search the proof of coverage record, accept exemptions only for the owners they name, and keep the evidence with the date. Do it the same way for every vendor and the uninsured ones stop reaching your jobs.

Book a demo to see vendor insurance verification run inside a KYB flow, or read how it works.

Cited sources

Michelangelo Frigo Michelangelo Frigo (Co-Founder at Zyphe) Michelangelo Frigo is a privacy and identity infrastructure expert and co-founder of Zyphe.

Frequently Asked Questions

Search the Division of Workers' Compensation proof of coverage database by the contractor's legal name or FEIN, and confirm a policy is in force today from its effective and expiration dates. If none is in force, search the exemption database for the business's officers.

It is evidence that a policy existed when the certificate was issued, not proof that it is in force now. The state's proof of coverage record is more current, because a cancellation shows there and never on the certificate.

One employee in the construction industry, four in most other private businesses, and six regular employees on a farm. In construction, sole proprietors and partners count as employees, and corporate officers and LLC members count unless they hold an exemption.

No. An exemption is personal to the officer it names, and the employees still count. A construction business with an exempt owner and one employee needs a policy; any other business needs one once its employees reach four.

Two years from its effective date, for certificates issued since 1 January 2013. The officer can revoke it earlier, and the Division can revoke it if the requirements are not met.

No. At most three officers of a construction corporation, or of a group of affiliated corporations, may elect to be exempt, and each must own at least 10% of the stock.

Yes. Section 440.10 makes the contractor liable for the compensation of a subcontractor's employees unless the subcontractor secured it, and requires contractors to ask subcontractors for evidence of cover.

Yes. A system can apply the state's threshold rule to the vendor's trade and headcount, search the state's proof of coverage and exemption records, and return one status per credential that a platform uses to lock or release jobs.

Compliance without the data honeypot

Zyphe verifies identity without a central store of your customers' PII. See it in action.

Book a demo